Find published products, organizations and references. Results prioritize relevance; paid relationships do not affect organic order.
73 results · Page 3 of 4
Metabo identifies insert 628901000 for KHE 3250 and KHE 3251 rotary hammers in an empty metaBOX 165 L. It is a shaped transport insert, not a hammer-drill operating cover. Both the tool designation and box size are relevant when checking whether this accessory matches an existing kit.
View referenceThis metaBOX 145 insert is intended for Li-Power and LiHD battery basic sets. Metabo describes arrangements with four battery packs and either one double charger or two chargers. It is a storage insert, not authorization to operate chargers inside a closed case. Confirm the exact pack and charger layout with the manufacturer.
View referenceMetabo's official insert table pairs tool designations with metaBOX sizes and insert numbers. Use it to distinguish closely named saw, hammer and sander models. A listed tool match and a listed box match are both needed for the intended storage combination.
View referenceMetabo lists this metaBOX 165 L version for its corded and cordless angle grinders up to a 125 mm disc diameter. The source gives internal dimensions of 479 by 268 by 130 mm. Check the exact grinder, guard and accessory arrangement; the directory does not extend that catalog scope to other brands.
View referenceThis removable rubber boot is identified for the Milwaukee M18 FUEL 2953 impact driver. It covers the tool body to limit contact with work surfaces while retaining a model-specific fit. Milwaukee prohibits use on or near live electrical circuits and warns that using it on other products may damage the motor. Compare the full tool number before ordering.
View referenceMilwaukee specifies this boot for its 2967-20 half-inch high-torque impact wrench with friction ring. Its flexible rubber construction is intended to protect the tool and contacted surface. The wrench model matters: this is not the 2953 driver boot. The source excludes other tools and use on or near live electrical circuits.
View referenceThe 48-22-8612 stores SAWZALL blades and other accessories outside a PACKOUT stack. Its published contents include two attachment mounts and a blade-divider tray, with a 12-inch blade clip. Check for the required metal-reinforced toolbox corners. This is blade storage rather than a fitted case for the saw itself.
View referenceThis clip-in rack organizes four M18 batteries and is described for PACKOUT wall plates, with a slide-on toolbox-lid connection also listed. It differs from the three-battery side attachment. Match the mounting interface and follow the source installation guide; the rack itself is a storage accessory, not a charger.
View referenceThe 48-22-8603 holds three M18 batteries on the exterior of a compatible PACKOUT toolbox. Milwaukee specifies attachment at metal-reinforced corners and includes two mounts. This side-mounted arrangement is distinct from the four-position wall rack; inspect the receiving toolbox rather than relying on the PACKOUT name alone.
View referenceMilwaukee's PACKOUT catalog connects boxes, bags, racks and attachment products within one modular system. Use individual model pages to resolve the receiving component and supplied mounting hardware; system membership alone does not describe every attachment location.
View referenceThis PACKOUT case includes a customizable foam insert for a user-defined tool layout. Milwaukee lists an interior of 18.9 by 12.6 by 4.5 inches and identifies the case as part of its modular storage system. The usable pocket will be smaller after cushioning is retained around the contents; no individual tool fit is asserted.
View referenceMilwaukee publishes model-specific protective boots and the PACKOUT storage range. Related records distinguish tool-mounted covers from foam cases, battery racks and accessory containers, with original model references rather than assumed cross-generation compatibility.
View referenceGeneral hard cases and stackable tool boxes organize a kit during storage and transport. Interior space, foam allowance and closure clearances matter more to fit than the exterior footprint. Listed modular connections apply only to the named system.
View referencePelican publishes protective equipment cases with configurable interiors. This directory links the 1520 case to its interior dimensions and available configurations, without claiming that any particular power-tool kit has been physically fitted or tested.
View referenceThe 1520 is a general equipment case offered with different interior configurations, including foam and padded dividers. Pelican lists internal dimensions of 18.06 by 12.89 by 6.72 inches. Measure the entire kit and account for its cushioning layout; this directory has not tested a particular drill or battery inside the case.
View referenceAbrasive organizers divide discs by grit; router-bit cases hold cutting tools by shank size. These serve different storage needs. Check disc diameter, bit-shank fit and the supplied contents rather than inferring that every pictured accessory is included.
View referenceThis category separates shaped circular-saw and reciprocating-saw inserts from blade-only storage. Match the saw model and outer case when buying an insert. Blade organizers should be checked against actual blade length and the listed mounting hardware.
View referenceCompare hand-carried bags and structured backpacks for service and jobsite kits. Pocket arrangement, base construction and access shape the choice. Modular attachment is recorded only where the manufacturer identifies a compatible storage system.
View referenceCase-lid panels and layered drawer inserts help keep small tools separated and accessible. Panels require an identified mounting case, while sheet foam requires an individual layout. Compare these two approaches through source-linked products and manufacturer references.
View referenceExplore protective impact-tool boots, grip sleeves and purpose-built tether attachments. These accessories address different jobs: surface contact, handling or tool retention. Start with the exact model and consult the linked manufacturer for limitations and installation requirements.
View referenceVeto Pro Pac publishes tool bags for service technicians, including the TECH PAC backpack. Related records focus on the carrying format and organization features found in the official catalog, without repeating customer reviews or performance rankings.
View referenceTECH PAC is Veto Pro Pac's backpack-format bag for service technicians. The manufacturer describes a central panel and a molded base that support organized carrying of a tool kit. This listing identifies model VPP10070; other TECH PAC variants should be compared separately rather than assumed to share the same layout.
View referenceWheeled boxes and tool backpacks bring different access and carrying arrangements to a mobile kit. Check the handle configuration, stair access and loaded weight against your route. Connected product pages identify the actual storage format and manufacturer.
View referenceProtect the accessories that travel with saws, sanders and routers: guide rails, saw blades, abrasives and router bits. Records retain size and model distinctions so a rail bag, bit organizer or fitted saw insert can be compared on its intended storage role.
View referenceIndependent product directory. Listings summarize manufacturer information, not hands-on tests. Match the exact tool, battery, case and accessory model before purchase; follow the original manufacturer instructions. Linked sellers set current prices and availability. No affiliate relationship is asserted.